GET 10% OFF YOUR FIRST ORDER! | PROMO CODE: NEWROOM
Butterfly and leafy crescent-moon suncatcher with three hanging prisms and rainbow flecks in sunlight

How to Hang a Suncatcher in a Window Without Drilling

How to Hang a Suncatcher in a Window Without Drilling

Before you put up a hook, hold the suncatcher in a patch of sun and turn it slowly. If the rainbow lands on the floor, move the prism a few inches and see where the colors go. Once you find a spot you like, you can hang it from the glass, the frame, or a curtain rod.

1. Find a sunny spot and mark the hook height

Check the window when you’ll actually be in the room. If you want to see the colors when you get home, test in the late afternoon. A window can look bright even when the prism itself is in shade.

Hand holding a gold lotus suncatcher by its loop next to a tape mark on a window frame
Illustrative example. Hold the lotus suncatcher by its top loop to check where the hook would go. View larger image.

Hold the prism where the colors land best. Then let the whole piece hang from its chain or loop. The top of that loop shows you where the hook needs to go. Check that the piece clears the glass, blinds, and curtains when you open the window.

Purple crescent-moon suncatcher with gold stars and hanging prisms beside rainbow flecks on a wall

2. Choose a way to hang it without drilling

Check what comes with the suncatcher first. If you need your own hook, match it to the surface and the weight of the whole piece, including the chain. If you’re in a dorm or rental, check the rules before attaching anything.

  • On smooth glass. Use a suction hook only if the suncatcher maker allows it and the hook is rated for both the glass and the weight. Follow the hook’s cleaning and mounting directions.
  • On the frame or nearby wall. Choose a removable hook approved for that surface. Follow the package directions for how long to wait before hanging the piece.
  • From a curtain rod. If the rod and brackets can take the extra weight, slip the hanging loop over the rod or use a compatible ring. Make sure the curtain can slide without snagging the chain.
Butterfly, lotus, and crescent-moon suncatchers hanging from a suction hook, a frame hook, and a curtain rod ring
Illustrative mounting options, from left to right: suction hook on glass, removable hook on the frame, and a ring on a curtain rod. View larger image.

3. Adjust where the rainbow lands

  • It sparkles, but there’s no rainbow on the wall. Check whether direct sun is hitting the prism. Try a sunnier window or come back when the light has shifted.
  • The colors land on the floor. Hold the prism a little higher or turn it slowly and look around before moving the hook.
  • The colors are hard to see. Look for them on a light wall or ceiling. Rotate the prism a little to see whether you can move them off a dark surface.

If the glass focuses sunlight into a bright pinpoint, move the piece out of direct sun.

Purple crescent-moon suncatcher beside a sunny window with rainbow flecks shifting as a hanging prism turns
Illustrative example. Gently turning a prism changes where the rainbow flecks land. View larger image.

What is a suncatcher?

A suncatcher is a decoration that catches light, usually near a window. A clear, faceted prism can spread a beam of sunlight into rainbow colors.

If you’re still choosing a design, measure straight down from the hook to where you want the prism to sit. Use that distance to compare hanging lengths when you shop crystal suncatchers for windows.

Purple crescent-moon suncatcher with its top hook, chain, and lowest crystal prism visible beside a window
Illustrative setup. Measure straight down from the hook to the height where you want the prism to sit.

Leave a comment

* Required fields

Please note: comments must be approved before they are published.

x