How Many Feet of String Lights Do I Need for My Bedroom?
How Many Feet of String Lights Do I Need for My Bedroom?
Start with the area you want to glow. A 5-foot line above your headboard needs about 5 feet of lit wire. A 4-foot window with lights hanging 18 inches down each side needs 7 feet. Measure the path to your outlet or USB power source separately.
Write down two numbers. Measure the lit run from the first bulb to the last. Then measure the lead from the power source to the first bulb. If a listing gives only the overall length, ask how much of it actually lights up.
How to measure for bedroom string lights
Use a tape measure for a straight line. For a soft dip or a curve, hold a piece of yarn along the path the lights will follow. Mark the start and finish, lay the yarn flat and measure it. This gives you the length of the actual drape, including the extra wire a dip takes.
Hold yarn along the curve you want, then lay it flat and measure from end to end. View larger image.
Next, trace the lead cord from the start of the display to power. If the outlet sits behind a nightstand, measure down the wall and around the furniture along the path the cord will actually take.
Three bedroom layouts and the math
Illustrative layout examples, from left to right: above a headboard, around a window, and along two ceiling edges. View larger image.
Layout
Example measurement
Lit length
Above a headboard
One straight 5-foot run
5 feet
Across and down a window
4 feet across + 1.5 feet down each side
7 feet
Along two walls or ceiling edges
One 8-foot edge + one 10-foot edge
18 feet
If you want lights around all four edges of an 8-by-10-foot room, add 8 + 10 + 8 + 10 for 36 feet of lit wire along straight edges. Measure any dips and the path to the power source separately.
Say your window setup needs 7 feet of lit wire, and the route from the outlet to the first bulb measures 3 feet. Look for a strand with at least 7 feet between the first and last bulbs and a lead cord that reaches 3 feet. A listing that says “10 feet total” leaves those two measurements unclear. Some strands also have an unlit tail after the last bulb.
4 ft across1.5 ft1.5 ft3 ft unlit lead
Illustrative setup. The window route uses 7 feet of lit wire. Measure the 3-foot example from the outlet to the first bulb separately.
Pick the light style after you measure
A single strand works for tracing a shelf, headboard or window edge. If you’re comparing lengths in meters, 2 m is about 6.6 feet and 3 m is about 9.8 feet. DormVibes lists those two sizes for its mushroom strand, with separate USB and battery options. The listing gives the available option lengths. Ask how much of the wire is lit and how far it is from the power source to the first bulb before matching either option to your measurements. View Warm White Mushroom Fairy Lights.
Curtain lights make a backdrop with vertical strands. Measure the width and drop of the whole area you want to cover. The DormVibes warm white curtain set lists a display of approximately 9.8 feet wide by 9.8 feet tall, so check both dimensions against your wall before choosing it. View Warm White Wall Lights.
Check the listing before you order
Use your two measurements to narrow down the options. If one strand falls short, check whether two separate runs make sense for your room. Follow the manufacturer’s instructions for powering each set and check whether the model allows them to connect. Shop String Lights.
If you’re considering an overhead layout, check your room rules and the selected light’s installation instructions before planning attachment points. For layout ideas, compare our LED room guide and fairy-light bedroom ideas.