Measure the space you want the tapestry to fill. Subtract the room you want to leave at each edge, then check the height. For example, a 72-inch wall span with 6 inches of wall visible on each side leaves 60 inches of usable width.
Measure the wall before you pick a design
Find the boundaries. Measure between the furniture, trim, or shelves that frame the display.
Decide how much wall to leave visible. Pick a margin on each side and subtract both from the measured width. Do the same at the top and bottom to get the usable height.
Check the height and orientation. Measure the height available above the furniture. Use the design’s intended orientation so the artwork faces the right way. Leave room for any rod or clips.
72 in. of wall60 in. of fabric6 in.6 in.
Illustrative setup. A 60-inch tapestry centered in a 72-inch wall span leaves 6 inches of wall on each side.
Tapestry sizes for above a bed or desk
Illustrative layout examples showing a tapestry above a bed and above a desk. See the table below for measurements. View larger image.
Example space
Room around the fabric
Maximum fabric size in this example
Bed wall · 72 in. wide × 70 in. high
6 in. left and right, 4 in. top and bottom
60 in. wide × 62 in. high
Desk wall · 48 in. wide × 37 in. high
4 in. left and right, 3 in. top and bottom
40 in. wide × 31 in. high
These are worked examples. Measure your own space, allow for any hanging hardware, and leave access to switches, outlets, vents, and doors. If the fabric will hang above furniture, check that your room rules and hardware allow that location.
Picture the size on your wall before ordering
Mark the corners with a method your wall and room rules allow, or have someone hold up a paper rectangle cut to the size you’re considering. Step back to your bed or desk and see where the lower edge falls. Check whether a rod, clips, or a header would add to the overall height.
Cut paper to the size you’re considering and hold it above the desk to check the fit. View larger image.
Compare the measurements with the size selector
In the larger example, the 59.1 × 59.1 inch square option on the Mushroom Starry Night tapestry fits within the illustrated fabric area. In the desk example, the Neon Mt Fuji tapestry lists a 37.5 × 29 inch option. That fits the example when 37.5 inches is the horizontal side and 29 inches is the drop. Check the design orientation and selected size before ordering.
Browse wall tapestries for more designs. If you’re shopping for art intended to react under UV light, explore Blacklight Tapestries and check each listing for the lighting it requires.